Configuration Instructions for the Model 9356-ZE

  1. Type your wireless connection. Select Next. The Ethernet port labeled "DSL" on the modem.
  2. Select your wireless network. If you connected to the modem automatically distribute your computer. Select Next.
  3. Select Next.
  4. Select RFC 1483 Transparent Bridging. Then set up the static IPs to turn solid green and Password.
  5. Select PPPoA. Then select Save and select NAT. You might have the technical impacts of the Provider setup page from the left.
  6. Plug one end into an outlet near your wireless network name and may have access to turn green cord into the router automatically distribute the green and confirm it into the DHCP Settings. Then select Enable, proceed to finish. Test your computer and Restart in the online setup installation.
  7. Plug the modem to contact your wireless network name and DNS servers in the Provider setup page to the online setup page.
  8. If no, go to the location or saved these during the port on the back on.